Bambu Lab
AMS 2 Pro
Automatic Material System
Introduction
Electro-Magnetic Air Vent
Automated venting facilitates dehumidification during drying and ensures airtight sealing for weeks of high-quality printing.
Auto-rotate Drying
During the drying process, the filament spools rotate automatically to ensure more even drying.
RFID Sync
AMS 2 Pro uses RFID to auto-match drying settings for Bambu official filaments, no manual input needed.
Speed Up!
Faster Multi-material Printing!
The powerful Bambu permanent magnet synchronous servo motor accelerates filament feeding by 60% for enhanced efficiency.
Saves an average of 10 minutes per 100 filament changes.
Tool-Free Filament Tubes Access
Removing snapped filament from the first-gen AMS requires extracting all spools and disassembling the shell with two screws, taking 3-5 minutes.
In contrast, the AMS 2 Pro offers direct, tool-free access to filament tubes from the top.
Ceramic Inlet
Ceramic filament inlets with Vickers hardness of 1200 significantly enhances durability.
Highlights
1. Active Air Vent 65°C Filament Drying
2. Air-tight Filament Storage
3. Up to 24-Color / Multi-Material Printing
4. Brushless Servo Feeding Motor
5. RFID Filament Sync
Technical Specifications
Product Dimensions: 372 x 280 x 226 mm³
Net Weight: 2.5 kg
Housing Material: ABS / PC
Filament Supported: PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF / PAHT-CF / PETG-CF / Support for PLA / PETG, and TPU for AMS
Filament Not Supported: TPE, generic TPU, PVA (damp), BVOH (damp),Bambu PET-CF / TPU 95A, and other filament that contains carbon fiber or glass fiber
Filament Diameter: 1.75 mm
Spool Dimension: Width 50-68 mm, Diameter 197-202 mm
RFID Identification: Supported
Highest Temperature: 65 °C
Active Moisture Discharge: Supported
Sealed Storage: Supported
Temperature & Humidity Detection: Supported. Real-time temperature and humidity can be displayed on the screen, Bambu Studio, and Bambu Handy.
Input: 24V 4A
Inside the Box
Bambu AMS 2 Pro x 1
Desiccant x 4
PTFE Tube (185mm x 2 + 225mm x 2+ 900mm x 1)
Bambu Bus Cable 6 Pin x 1
Compatibility
The AMS 2 Pro will be compatible with all Bambu Lab products.
For X1 / P1 series Owner
To connect a single AMS 2 Pro unit to X1/P1 series printer, a Filament Buffer (SA003), a PTFE Tube Coupler (FAZ006), and a 4-pin Cable (CAB002-N) are required.
To connect multiple AMS 2 Pro units, an AMS Hub (SA002-N), a PTFE Tube Coupler (FAZ006), and a 4-pin Cable (CAB002-N) are required.
X1 / P1 series printer can connect up to 4 AMS units (including AMS HT, AMS, AMS 2 Pro).
For drying function
One Switching Adapter is required for each AMS 2 Pro unit.
For P2S Owner
To connect one or two AMS 2 Pro unit(s) to P2S, a P2S Filament Buffer (SA011) is required.
To connect more than two AMS 2 Pro units, a P2S Filament Buffer (SA011) and a 4-in-1 PTFE Adapter(s) (FAZ013-N) are required.
P2S printer can connect up to 4 AMS units (including AMS, AMS 2 Pro) and 4 AMS HT units.
For drying function
P2S printer can power one AMS 2 Pro unit for drying without the switching adapter.
To dry filaments in multiple units simultaneously, each additional AMS 2 Pro unit requires its own Switching Adapter.
For H2S Owner
To connect more than one AMS 2 Pro units to H2S, a 4-in-1 PTFE Adapter(s) (FAZ013-N) are required.
To connect a single AMS 2 Pro unit, no extra accessory is required.
H2 series printer can connect up to 4 AMS units (including AMS, AMS 2 Pro) and 8 AMS HT units.
For drying function
H2S printer can power one AMS 2 Pro unit for drying without the switching adapter.
To dry filaments in multiple units simultaneously, each additional AMS 2 Pro unit requires its own Switching Adapter.
For H2D / H2C Owner
To connect more than two AMS 2 Pro units to H2D/H2C, a 4-in-1 PTFE Adapter(s) (FAZ013-N) are required.
For better performance, we recommend 4-in-1 PTFE Adapter II (SA014) for H2C.
To connect one or two AMS 2 Pro unit(s), no extra accessory is required.
H2 series printer can connect up to 4 AMS units (including AMS, AMS 2 Pro) and 8 AMS HT units.
For drying function
H2 series printer can power one AMS 2 Pro unit for drying without the switching adapter.
To dry filaments in multiple units simultaneously, each additional AMS 2 Pro unit requires its own Switching Adapter.
